Cable and Wire Harness IPC-A_620-C For Specialist

Cable and Wire HarnessIPC-A_620-C For Specialist

This 3-day, lectured course is a comprehensive, operator-level certification that teaches inspectionand assembly criteria for all three classes of cable and wire harness assembly. This course is based on the IPC/WHMA-A-620, “Requirements and Acceptance for Cable andWire
Harness Assemblies”, the most widely usedinspection specification for the industry.

All the exams will be done online directly on the IPC Training center to avoid Certificate typo errors and fraud. We will bring all of the computers and if done on your premises you company should provide Internet Access.

OPTIONAL HANDS-ON LABS This is an optional, 1-day, hands-on lab.

Course Outline:

Day 1

  • Module 1
    Introduction/Policy and Procedures
    Requirements and Acceptance for Cable and Wire
    Harness Assemblies andApplicable Documents
    Cable/Wire Preparation
    Measuring Cable Assemblies
    Testing Cable Assemblies
    Review and testing
  • Module 2
    Crimp Terminations
    Insulation Displacement Connections
    Review and testing
  • Module 3
    Soldered Terminations
    Review and testing

Day 2

  • Module 4
    Connectorization
    Molding/Potting
    Review and testing
  • Module 5
    Splices
    Review and testing
  • Module 6
    Marking and Labeling
    Wire Bundle Securing
    Shielding
    Cable/Wire Harness Protective Coverings
    Review and testing

Day 3

  • Module 7
    Coaxial andTwin axial Assemblies
    Review and testing
  • Module 8
    Solderless Wire Wraps
    Review and testing

An IPC WHMA-A-620 Certificate will be given to the Student at the end of Training if he or she succeeds.

The IPC Certificate is valid for 2 Years and during that time you can add any modules.  

 

Day 4 OPTIONALHANDS-ON LABS

  • Module 1
    Lab Overview
    Review harness assembly print, materials and tooling
  • Module 2
    Wire Prep andSolder Termination – no soldering
    Cut and semi-stripping five wires
    Install wires onto the harness board
  • Module 3
    Lug Crimp Terminations
    Cut, strip and crimp two styles of lug-type terminals
    Install wires onto the harness board
  • Module 4
    Pin Crimp Terminations
    Cut, strip and crimp two styles of pin terminals
    Install wires onto the harness board
  • Module 5
    Coaxial Terminations
    Cut, strip RG59 wire; assemble two coaxial connections
    Install wires onto the harness board
  • Module 6
    IDC Terminations
    Cut, strip CAT5 wire; crimp twoIDC connectors
    Install wires onto the harness board
  • Module 7 
    Mass Terminations
    Cut, ribbon cable; crimp two mass termination connectors
  • Module 8 
    Harness Securing
    Secure the cable using tie-wraps and lacing cord

ADRESS

502, rue Valois, Suite 2, Vaudreuil-Dorion, Quebec J7V 1T4